Additive Manufacturing (AM)
- Additive Manufacturing (AM) (15)
- Al-Base (72)
- Cast Iron (50)
- Co-Base (8)
- Corrosion Damages (43)
- Cu-Base (75)
- Edge zone (41)
- Failure Cases (60)
- Fe-Base (347)
- Fe-Heat Treatment Series (91)
- Mg-Base (3)
- Ni-Base (24)
- Other (19)
- Plastics (15)
- SEM (99)
- Ti-Base (10)
- Zn-Base (5)
.Additive Manufacturing (AM) – Explanation of terms
1.4404 | X5CrNoMo17-12-2 | PF -45/+15 µm
1.4404 | X5CrNoMo17-12-2 | PF -45/+15 µm | VED 27,78 J/mm³ | BUR 25,92 cm³/h
1.4404 | X5CrNoMo17-12-2 | PF -45/+15 µm | VED 41,67 J/mm³ | BUR 21,60 cm³/h
1.4404 | X5CrNoMo17-12-2 | PF -45/+15 µm | VED 74,4 J/mm³ | BUR 12,10 cm³/h
2.4668 | NiCr19NbMo | Inconel 718 | N07718 L-PBF component
CC484K | CuSn12Ni2 L-PBF on 1.7225 | 42CrMo4
Titanium Grade 23 | Ti6Al4V ELI | PF -45/+15 µm
Titanium Grade 23 | Ti6Al4V ELI | PF -45/+15 µm | VED 117 J/mm³ | BUR 11 cm³/h
Titanium Grade 23 | Ti6Al4V ELI | PF -45/+15 µm | VED 50 J/mm³ | BUR 9 cm³/h
Titanium Grade 23 | Ti6Al4V ELI | PF -45/+15 µm | VED 58 J/mm³ | BUR 21.6 cm³/h
WE43 | PF -53/+15 µm
WE43 | PF -53/+15 µm | VED 101 J/mm³ | BUR 7,1 cm³/h
WE43 | PF -53/+15 µm | VED 139 J/mm³ | BUR 6,5 cm³/h
WE43 | PF -53/+15 µm | VED 238 J/mm³ | BUR 3 cm³/h