Fe-Heat Treatment Series
- Additive Manufacturing (AM) (15)
- Al-Base (70)
- Cast Iron (48)
- Co-Base (8)
- Corrosion Damages (43)
- Cu-Base (75)
- Edge zone (39)
- Failure Cases (60)
- Fe-Base (324)
- Fe-Heat Treatment Series (86)
- Mg-Base (3)
- Ni-Base (23)
- Other (18)
- Plastics (15)
- SEM (99)
- Ti-Base (10)
- Zn-Base (5)
- 1.0401 | C15 +N Normalised at 950 °C (furnace cooling)
- 1.0501 | C35 +N Normalised at 900 °C (furnace cooling)
- 1.0501 | C35 +QW +T quenched (in water) and tempered
- 1.0503 | C45 +N Normalized
- 1.0503 | C45 Induction hardened
- 1.0535 | C55 +N Normalised at 850 °C (furnace cooling)
- 1.0535 | C55 +QW +T quenched (in water) and tempered
- 1.0605 | C75 hardened
- 1.0605 | C75 soft annealed
- 1.1121 | C10E +N (furnace cooling)
- 1.1121 | C10E +QW +T Hardened and tempered (quenchant: water)
- 1.1191 | C45E +N Normalised at 850 °C (cooled with compressed air)
- 1.1191 | C45E +N Normalised at 850 °C (furnace cooling)
- 1.1191 | C45E +QW +T Hardened and tempered (quenchant: water)
- 1.1191 | C45E +QW +T Overheated hardened and tempered
- 1.1191 | C45E +QW Hardened at too low temperature
- 1.1210 | C53E induction hardened (incorrectly)
- 1.1221 | C60E +N Normalised at 850 °C (furnace cooling)
- 1.1221 | C60E +QW +T quenched (in water) and tempered
- 1.1231 | C67S+I
- 1.1231 | C67S+QO+T
- 1.1248 | C75S +I isotherm hardened
- 1.1248 | C75S +N Normalized at 850 °C (furnace cooling)
- 1.1248 | C75S +QW +T quenched (in water) and tempered
- 1.1248 | C75S soft annealed
- 1.1269 | C85S +N
- 1.1269 | C85S +QW +T quenched (in water) and tempered
- 1.1274 | C100S +N (furnace cooling)
- 1.1274 | C100S +QO +T Hardened and tempered (quenchant: oil)
- 1.1274 | C100S +QW +T quenched (in water) and tempered
- 1.1274 | C100S +QW +T Superheat hardened and tempered
- 1.1274 | C100S +QW Superheated hardened
- 1.1573 | C135U (+AC)
- 1.2067 | 102Cr6 +N Normalized at 840 °C (furnace cooling)
- 1.2067 | 102Cr6 +QO +T Hardened and tempered (quenchant: oil)
- 1.2067 | 102Cr6 +QO +T Hardened and tempered at 150 °C (quenchant: oil)
- 1.2067 | 102Cr6 +QO +T Hardened and tempered at 150 °C (quenchant: oil)
- 1.2067 | 102Cr6 +QO +T Hardened and tempered at 180 °C (quenchant: oil)
- 1.2067 | 102Cr6 +QO +T Hardened and tempered at 240 °C (quenchant: oil)
- 1.2067 | 102Cr6 +QO +T Sub-heat hardened and tempered
- 1.2067 | 102Cr6 +QT | SAE52100 | AMS6440
- 1.2067 | 102Cr6 +QW +T Annealed on cementite network, hardened and tempered (quenchant: water)
- 1.2067 | 102Cr6 +QW +T Annealed on cementite network, superheat hardened and tempered
- 1.2067 | 102Cr6 +QW +T Hardened and tempered (tempering temperature: 210 °C)
- 1.2067 | 102Cr6 +QW +T Quenched and tempered (quenchant: water)
- 1.2067 | 102Cr6 | SAE52100 | AMS6440 Incomplete martensitic transformation
- 1.2067 | 102Cr6 Annealed on cementite network at 950 °C
- 1.2067 | 102Cr6 Incomplete martensitic transformation (2)
- 1.2067 | 102Cr6 Induction hardened
- 1.2210 | 115CrV3 +QO +T Hardened and tempered (quenchant: oil)
- 1.2210 | 115CrV3 +QO +T Hardened and tempered (quenchant: water)
- 1.2210 | 115CrV3 Annealed on cementite network at 950 °C
- 1.2241 | 51CrMnV4 Bainitized
- 1.2311 | 40CrMnMo7 +QT
- 1.2358 | 60CrMoV18-5 +QT
- 1.2714 | 55NiCrMoV7 +A
- 1.2714 | 55NiCrMoV7 +QT
- 1.2738 | 40CrMnNiMo8-6-4 +QT
- 1.2767 | 45NiCrMo16 +QT
- 1.3505 | 100Cr6 +QT
- 1.3551 | 80MoCrV42-16 +QT
- 1.5026 | 56Si7 quenched and tempered with surface decarburization
- 1.5920 | 18CrNi8 carburised
- 1.6522 | 20MnNiCrMo3-2 +QT
- 1.6568 | 30CrNiMo5-5 +QT
- 1.6580 | 30CrNiMo8 +QT
- 1.7035 | 41Cr4 +I
- 1.7102 | 54SiCr6 +QT
- 1.7131 | 16MnCr5 +N Normalised at 950 °C (furnace cooling)
- 1.7131 | 16MnCr5 +QW +T Hardened and tempered (quenchant: water)
- 1.7131 | 16MnCr5 core microstructure after single hardening
- 1.7220 | 34CrMo4 +QT
- 1.7225 | 42CrMo4 +A Incomplete soft annealing structure
- 1.7225 | 42CrMo4 +AC soft annealed (completely)
- 1.7225 | 42CrMo4 +N Normalised at 850 °C (furnace cooling)
- 1.7225 | 42CrMo4 +Q
- 1.7225 | 42CrMo4 +QO +T Hardened and tempered (quenchant: oil)
- 1.7225 | 42CrMo4 +QO hardened in oil, not tempered
- 1.7225 | 42CrMo4 +QT
- 1.7225 | 42CrMo4 +QW +T quenched (in water) and tempered
- 1.7225 | 42CrMo4 laser hardened
- 1.7335 | 13CrMo4-5 +N
- 1.7701 | 52CrMoV4 +QT
- 1.8159 | 50CrV4 +I
- 1.8974 | S700 +Q (self-quenched)
- C15 | 1.0401 +QW +T Hardened and tempered (quenchant: water)